The Best Paracord Jig on the Market
A paracord jig is a small tool that holds parachute cord in place when making bracelets, belts, and even dog collars. They vary in material and construction, but the majority are made of wood.
We conducted an exercise where we sampled some of the paracord jigs labeled as the best on the market, and our findings did not surprise us. The best paracord jig in the world, (our world at least) is easy to make and use. That’s no brainer.
It would probably interest you to know that the wordparacord comes from ‘parachute’. Even more impressive is the fact that these cords are designed with material similar to the ones used to suspend the lines in parachutes. A paracord jig should, therefore, have the tenacity to withstand this firm but elastic material.
Simply put, a jig is that wooden tool that bracelet makers use to hold the strings in place, while the paracord is the actual material you use to make your art pieces.
If you love paracord bracelets (and there are many types), you can imagine the work that goes into harmonizing these threads.
5 Best Paracord Jig Reviews 2019
Lightweight, natural wood
Easy to assemble / disassemble
1. Pepperell Paracord Jig - adjustable, durable
This jig bears the standard dimensions of a bracelet maker at 5.5 x 3.2 x 10.8 inches, and it is quite light for traveling at 1.5lbs. The construction is simple and the finishing smooth. We like that the instructions are simple and that the manufacturer has included a simple braid pattern to guide you.
One of the best qualities of this bracelet maker is the fact that it can use both 3/8 and 1/2 buckle sizes.
The smaller one is designed for smaller items and the larger size for bigger items. At 10.8 inches, it will make 6-12-inch bracelets, but you can stretch that limit by changing the two buckles (3/8 and ½) for bigger ones.
Thanks to the sturdy material (hardwood), it lasts a long while. We tested the buckles on 550 and 325 parachute cords and it held well. These particular ones are some of the strongest there are in the market, and so you they make a good standard of measure when checking the strength of your jig.
This jig is ideal for making bracelets and dog collars. Unfortunately, it is not ideal for smaller items since you cannot adjust it downwards.
- You can adjust the length upwards.
- Hardwood is durable
- The screws that hold the buckle are easy to remove when changing
- Over time, the bolt wears off due to constant unscrewing.
- You can only adjust it upwards.
2. Zacro Paracord Jig - lightweight, natural wood
They do not make them any simpler than this wooden jig. Made of hardwood, it lasts almost as long as your interest in paracord bracelet making does. The wood used is free of harmful chemicals.
Even though its dimensions are 9*4*2.4 inch, this jig expands to 12 inches to accommodate a broader variety of artful pieces. When opened to the maximum 12 inches, it makes standard-sized bracelets and items in the 9-12-inch bracket but not smaller-sized key knobs. If you close it, you reduce it to half (6 inches) to make bracelets ideal for babies and younger children.
The package will contain a set of six buckles, six colorful parachute cords, and a user manual. The manual focuses on setting the jig up and preparing it for work.
As it comes with paracord, a section of users feel that it could help to have a simple ‘how -to’ guide. The good thing is that YouTube has plenty of bracelet tutorials.
The loom does not require tools to adjust. It also works several styles of weaving apart from the popular cobra. It is quite easy to use, after setting it up. You will adjust the height depending on the item you look forward to making, attach the paracords, and go! Anyone, including a young child with interest for craft, will master how to use this item in no time.
- Made of natural wood with no chemicals.
- The jig is expandable.
- The buckles could be bigger.
- It could help to have some basic instructions on bracelet making.
3. SpeedyJig Paracord Jig - colorful, adjustable
While most jigs are wooden, the SpeedyJig Pro Paracord Bracelet Jig is made of steel. It is brightly colored too, which is a welcome relief from the norm.
One of the reasons why paracord jigs eliminate guesswork while working on your craft items is the ruler that is attached to the base. The one on this jig is colorful and visible to ensure proper measurements in all your pieces.
It is usually 6 inches when closed, a size ideal for small bracelets and medium-sized paracord ornaments. When opened, you will have a whole 12-inch stretch for larger bracelets and ornaments. It is not large enough for dog collars, unfortunately.
It originally comes with two large buckles that allow an assortment of items to be made. Unlike a wooden jig, constant screwing and unscrewing of a buckle does not ruin steel. Therefore, you can remove and add buckles as often as you wish to suit the pieces you are making.
Additionally, you can adjust the height from as small as 6 inches to as large as 12 inches. The base has a strong stand that keeps it on one spot without tipping over. It is not the cheapest, but its stellar construction gives it an edge over several others on the market.
The little kit comes complete with all the things you would need to get started. Apart from the jig itself, you will have 4 buckles, 3 hanks of paracord, and color instructions. It is so easy to use that it is ideal for ages 8 and above.
- Adjust the buckle size or style without any tools.
- Colorful and of stellar construction.
- Quite pricey.
- You cannot adjust it lower than 6 inches.
4. Guzzle Buddy Paracord Jig - solid, compact
The most common complaint among paracord jig users is the quality of material. The little bolt on the wood burrows into the wood each time you change a buckle, making the drilled hole wider over time. Eventually, the bolt will no longer fit in its place, and you will need to discard it or reinforce it with metal.
The quality of this wood takes that fear away. Granted, constant drilling will make buckle changing unpleasant, but it lasts longer than most wooden jigs on the market. It is more expensive, but it lasts longer and is more flexible than most.
It expands in size, from 0 to 12 inches and hence ideal for making standard bracelets of any pattern, dog collars, key knobs, and even belts. The laser-etched ruler at the base of the jig ensures even sizes of bracelets.
Because the wood making this jig is robust and compact, its base is equally solid. While this is a good feature that keeps it steady as you pull and tag, it also makes this jig quite heavy. You cannot collapse it to be smaller than 12 inches, and so it will make a bulky package when traveling.
Other features that make this paracord jig a good acquisition are the extra buckles and enough clips. It has 6 clips on each side to make it possible to share the jig with another use (all at the same time). The clips are already fastened from the get-go, but you can loosen them to suit your project.
We found the buckles in the package to be small and only ideal for small-sized bracelets, but you can swap them for larger ones. Since you can expand the height, you can upgrade your skills to belt making. As a bonus, the manufacturer has already assembled it, and after a few tweaks, you can get down to bracelet making.
- It comes pre-assembled.
- It is solid and compact.
- You can expand the height to over 12 inches.
- It is expensive.
- Slightly heavy.
5. Max Hero Paracord Jig - easy to assemble / disassemble
The manufacturer of this wooden paracord jig makes it clear that they have not used any harmful chemicals. This collapsible jig is quite portable, as it will measure 6 inches when closed and weigh 300 grams.
The Adjustable Length Paracord-Jig Bracelet Maker is so easy to use that an 8-year-old can use it comfortably. As with most jigs, this particular one will not come with instructions on how to make a bracelet, but YouTube videos have that covered.
In the place of your regular clasps that hold the buckle, this jig has two small wooden poles that are sturdy enough for both large and small-sized buckles. They also make it possible to make buckle-less bracelets.
Most jigs will work with two paracords, but this can handle a triple threat. If you have the knack for it, you could attach three threads on each side of your pole and get on with it.
It measures 14.1 x 1.3 x 2.3 inches and weighs 8.8 ounces, but you can adjust the height to make smaller items. This jig is not pre-assembled, but it only takes a few minutes to get it ready. You will not need any equipment to out the bolts in their place, as this type of wood is quite soft.
One of the complaints that users have with this jig is in the material. It is made of soft wood that the bolts eat into quite fast. After a few weeks of consistent use, you will need to add a little piece of metal to hold the bolt in place.
- Easy to use
- Easy to assemble and disassemble.
- The wood is too soft.
- Not pre-assembled.
What’s So Special about a Paracord Jig?
Whether taking the gratitude challenge to make a Survival Bracelet or just making one for yourself, it will be practically impossible to go about it without a paracord. Ok, not to say that you cannot make one manually, but it would take days.
How does it help?
By holding everything in place to make your work easy. You will need a tool to keep your paracord in place as you weave it together. You will not only reduce your labor and time spent by using a paracord jig, but you will also get better results. You can easily make 20 standard size bracelets in one hour.
The ideal paracord jig will ensure equal-sized pieces of whatever art piece you are making. How is this possible? You see, it is a standardized tool with a ruler attached at the base. At the beginning, you could measure and mark your preferred length in inches so that every one of your bracelets comes out in this size.
Remember we said the best paracord jigs have an easy (yet sturdy) construction? Well, they are also quite easy to use. Matter of fact, a keen 8-year-old will figure this tool out quite easily. If they are curious enough, they will be weaving mean bracelets in just a day of using it for the first time.
Must Haves ofan Ideal Paracord Jig
This will solely depend on the items you want to make using your paracord jig. The standard jig will have fixed buckles for the smaller items, but bigger ones allow for a variety of art pieces.
Most jigs are wooden, but the interwebs have an easy way ofinserting a piece of metal to make it even sturdier. Hardwood makes an excellent choice of material for two reasons. One, it is durable. If you are thinking of getting a paracord jig for a teenager with a passion for art, you can be sure that they will put it to good use. Wood sure does take a beating.
Another reason that makes wood favorite is the weight. You do not want to lag a 20lb paracord jig around town.
If wood does not impress you, steel might. Essentially, manufacturers will use coated steel. It is not as heavy as you would expect, and it lasts long. Additionally, steel is not easily tipped over when working. The main downside is that it is heavier than wood.
- Sturdy Build
You will be pulling two (or more) nylon paracord on the jig while you weave. You will certainly put pressure on the wood, and only a jig of sturdy construction will last any reasonable time. The material used will affect the sturdiness, but the buckles on it are more-they will therefore bear all the pressure. Before buying one, you can rely on customer reviews or test the buckles out yourself.
- The Size
The wider the jig, the broader the variety of buckle sizes you can use in it. Buckle variation matters as it makes your tool interchangeable, which makes it possible to create several types of art pieces. Apart from the usual hand bracelet, you can make key chains and a dog collar with an interchangeable jig.
The length generally determines the size of your pieces. The most popular length, 10-12 inches, works ideally for bracelet makers, but you would need a longer jig for belts and dog collars or even fishing nets.
If you travel consistently and want to take your paracord jig with you, you may want to consider a shorter and narrower piece for easy porting. It would have been more convenient if collapsible ones would be made.
- Multiple Threads
A standard paracord jig manages two strands of cord. It also accommodates two fixed buckles. An even better one will allow you to weave together three cords and even have clasps for more buckles. In fact, if the buckle holder is large and sturdy enough, it will allow you to weave your bracelet without a buckle.
- A Sturdy Base
While weight is seen as a disadvantage, it sometimes helps ground your paracord unit. A good jig will have a broad base to keep it from lifting as you work.
- Good Finishing
Before buying any wooden tool or item, it will serve you well to confirm that the sides are properly finished. The last thing you need is a minor injury caused by a splinter. You will want to ensure that the jig is well sanded and smooth all through.
- Ease Of Use
The thing about paracord jigs is that they are a favorite of both adults and the young. You want one that is not so complex, especially if you have a young one you want to entice into weaving. A standard jig is wood and buckles. As simple as that!
Now for the fixed buckles, the standard jig will have each aside. An adjustable one is a popular option. Adjustable buckles do not necessarily complicate the tool-rather they give you a wider option of items you can make compared to fixed buckles.
We like to say that the price matters the least when buying a high-quality item, but you should not neglect it altogether. The cost will be dependent on factors such as your preferred material, the flexibility of the jig (in terms of buckles), and its general sturdiness, among other things. Before you break the bank, remember that the best does not necessarily cost the most.
We lined up five of the best paracord jigs and evaluated each of them according to the factors above. We have reviewed them from the best in that order.
Leader of the Pack
Before choosing the best paracord jig, we looked at the usability, construction, price, and whether it is a necessary addition to your tool shed in the first place.
- Is It Necessary?
Well, if you are a mass bracelet maker, a jig will be a handy tool because it will reduce the time taken on a piece. After sharpening you memory muscle, you will master the workings of threads, and maybe graduate to three parachute cords as opposed to the regular two.
- User Friendliness
We found all the reviewed paracord jigs to be user-friendly. Sure, some came with poorly written manuals, but nothing was too off that we couldn’t put it together. These jigs come with a ruler, guaranteeing uniform measurements in all your craft pieces. An easy to disassemble unit is also ideal for travel.
Nothing can make up for poor construction. A paracord jig takes a lot of pulling and so needs to be sturdy to withstand all the pressure. The material used will indeed matter a lot here. Most manufacturers prefer wood, seeing that it is light and portable. It also holds knobs pretty well.
One of the minor issues we have had with wood is that it is quite soft and susceptible to constant drilling. When the jig is still new, the nut and spin lock securely in place, but soft wood can take this for so long. Eventually, it gets too loose. What is the solution?
You could do one of these two things; you could add a little piece of metal on the side to support the wood, or you could go for high-quality timber. It will certainly cost more, but it will last longer too.
An alternative material is coated steel. While it has none of those challenges associated with soft wood, it is quite heavy.
We preferred the Ezzzy-Jig Bracelet Maker for meeting most of those demands. It measures 12 inches at the max, but you can adjust it 6 inches for kid bracelets. We also like the fact that it is quite cheap.